A multi-functional street light control system, which is more electricity conserving and convenient, is presented here in this paper. ease of Main goal of the proposed work is to control switching of street light automatically according to light intensity, to develop traffic flow based dynamic control statistics using infrared
an XD 26 PLC is used to control the Street Lighting System. The paper is organized as follows: Section II presents the basic concepts of PLC and LDR. Section III gives an idea on the operating modes of the controller. The power control circuit is given in Section IV, while the Hardware Setup is presented in Section V.
based on PLC using IR sensors, Light Dependant Resistor (LDR) and solar panels for power consumptions. The Automatic Intelligent Car Parking System simply uses the input module from IR Sensors and LDRs to provide it to the Programmable Logic Controller (PLC) to ensure easy, reliable and effective car parking management. PLC Based Automatic ...
SEPCO's solar powered street lighting systems are an efficient means to provide lighting without the need for standard utility power. Every system provides cost savings by eliminating the need to trench standard electric wires for installation and providing no electric bill for the life of the system.
Every evening, an intelligent street lighting control system has to light up at the right time and function seamlessly. A city's street lights provide safer traffic conditions, safer pedestrian environment and can represent a great improvement to the city's architectural, touristic and commercial output.
M.Abhishek et al  haveimplemented design of traffic flow based street light control system with effective utilization of solar energy in the year 2015. They used the renewable source of energy i.e. the solar power for street lighting. They have also used 8052 series microcontroller and is developed by replacing the normal
ROHAIDA HUSIN et al: AUTOMATIC STREET LIGHTING SYSTEM FOR ENERGY EFFICIENCY BASED ON… DOI 10.5013/IJSSST.a.13.01.05 ISSN: 1473-804x 45 online, 1473-8031 print oscillation to the microcontroller while the power supply is used to power up the overall system.
This system is mainly designed for LED based street lights with auto intensity control. This is done using solar power from photovoltaic cells. Due to the many benefits of using solar energy, many institutions are opting to make use of solar energy. For converting the sunlight to electricity, photovoltaic panels are used for charging the batteries.
There are several attempts to control the road lighting for saving the energy and to reduce the pollution. In [5,6] a road lighting intelligent control system is proposed. The system is based on wireless network control that can implement real-time monitoring for road lighting. The proposed system uses the Zigbee wireless networks and
Telensa PLANet is the world's #1 outdoor lighting control system, deployed on 1.5 million lights around the world. A long-range, low-power radio system offers the easiest deployment, we are compatible with all of the leading lighting manufacturers, and we integrate easily with asset management systems.
Smart Street Lighting Control System with PLC. The system consists of hardware integrated in the luminaire (C LUM or PLC node) and a cloud based graphical user interface, which is used for easy monitoring and configuration of luminaires. The software allows users to plan the lamp infrastructure, optimize maintenance and monitor...
A specific street light control system based on the design presented in Section 4 has been implemented according to the requirements of a particular scenario. In this section the implementation of the hybrid approach of such system, the test scenario where it has been validated, as well as the test results are described.
Proceedings of the 2 nd International Conference on Current Trends in Engineering and Management ICCTEM -2014 17 – 19, July 2014, Mysore, Karnataka, India 44 SMART STREET LIGHTING SYSTEM BASED ON SENSORS USING PLC AND SCADA Swathi C A 1, Hemanth Kumar S 1, Annappa A R 2 1(Mechanical Dept, VTURC/ VTU, Mysore, India)
Powerline communication (PLC) is the natural choice for automating street lighting networks. PLC enables companies and municipalities to reduce operational costs and improve safety. G3-PLC is a new OFDM-based PLC system designed for grid automation that dramatically extends the range, data rate, and performance of powerline communications.
Our proposed system consists of smart street lights that have external light sensing that automatically turns on at desired intensity based on amount of lighting needed. The system also allows the controller/monitoring person to check estimate power consumptions as per current intensity of light as well as predict monthly power consumption.
A lighting control system is an intelligent network based lighting control solution that incorporates communication between various system inputs and outputs related to lighting control with the use of one or more central computing devices. Lighting control systems are widely used on both indoor and outdoor lighting of commercial, industrial ...
Development of a traffic light control system using PLC (Programmable Logic Controller) is the title of this project. This project is divided into two parts which are hardware and software. The hardware part for this project is a model of four way junction of a traffic light. Each lane has two limits switch (input) function as a sensor.
Circuit Diagram 2 . Automatic Street Light Control System.(Sensor using LDR & Transistor BC 547.) Very Simple. As Light is falling on LDR ( Light Dependent resistor) So LED does not glow. ( LED = Off). You can see now that we have blocked light falling on Light dependent resistor(LDR), so the LED glows ( LED = ON).
on the street. the microcontroller PIC16F877A is used as brain to control the street light system, where the programming language used for developing the software to the microcontroller is C -langua ge.  Automated street lighting using PLC, Street light controlling using PLC is a novel concept using XD26 PLC controller.
Final project report on Solar street light 1. i Darshil H Shah Vinit G Parikh A PROJECT REPORT Submitted By Darshil Shah (IU1241090051) Vinit Parikh (IU1241090031) Department of Electronics & communication Indus Institute of Engineering and Technology Ahmedabad November 2015 Under The guidance of Prof. Omkar Pabbati Solar Powered LED Street Light with Auto intensity control
Copyright © 2019.Company All rights reserved.